Viavi HST-3000 User Manual page 64

Chapter 4 Instrument Settings and User Preferences
Accessing a remote HST-3000
Using a PC
keyboard
VNC availability The VNC program can control the following functions:
44
7 If the message, "Failed to connect to server" appears, the
VNC viewer was not able to communicate with the HST. If
this happens, try the following solutions:
– Make sure you are using the correct IP address for the
HST.
– From the PC or laptop, ping the HST IP address to
verify the network link is working. If the link is not
working, restart the HST and repeat
step 5.
After you have connected to the HST from a laptop or PC
using the VNC viewer, you can use the computer's mouse or
keyboard to control the HST.
laptop keys map to the HST keypad.
Table 7 PC/laptop to HST key map
PC/Laptop key
F1 through F4
F5
F6
F7
F8
Escape
Enter
In Ethernet TE, you can do a ping, trace route and similar data
tests, but cannot change any data settings.
In DSL, you can perform modem emulate tests with Data
mode off.
HST-3000 Base Unit User's Guide
Table 7 shows how the PC/
HST Keys
Correspond to the HST soft keys
Configure
Home
AutoTest
System
Cancel
OK
step 1 through