Table of Contents
Advertisement
Deselect the SYN Cookie Certification check box to disable.
The default setting is 'Disabled'.
Address Filtering
Configure the IP or MAC addresses which are denied access to the camera.
Procedure 110 Enable/Disable and configure Address Filtering
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Firewall from the Security menu.
3
Select the Address Filtering tab.
4
Select Off to disable address filtering completely.
OR
Select Allow to allow address filtering for specified addresses
OR
Select Deny to deny address filtering for specific addresses.
The default setting is 'Off'.
5
If address filtering has been set to Allow or Deny:
a
Enter an IP or MAC Address to allow / deny in the IP or MAC Address text box in the
following format xxx.xxx.xxx.xxx.
Note:CIDR (Classless Inter-Domain Routing) is supported when using address
filtering. If using a CIDR address use the following format xxx.xxx.xxx.xxx/xx.
b
Select Add.
6
Select Apply to save the settings.
Editing an Address Filter
Edit an existing address filter.
Procedure 111 Edit an Address Filter
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Firewall from the Security menu.
3
Select the Address Filtering tab.
4
Edit the IP or MAC Address in the IP or MAC Address text box.
5
Select Add to save the changes.
90
Illustra Flex Series Installation and Configuration Guide
- End -
- End -
- End -
8200-1456-01 D0
Hide quick links:
Advertisement
Table of Contents
