Table of Contents
Advertisement
Offline Record Settings
When you configure the Offline Record Settings feature and once it detects a loss of connection with
the recorder, it sends the video stream to the SD card within the unit. This satifies the loss of video
and continues recording. Once the recorder is back online the camera initiates sending recorded
video from the SD card to the recorder. The maximum time recording during the outage depends on
the SD card and the recorded stream you selected. If the SD reaches full capacity, it deletes video
from earliest recording to latest recording. This feature integrates with the VE NVR 5.0 Trickle Stor.
Procedure 149 Configure Offline Recording Settings
Step Action
1
Select Setup on the Web User Interface Banner to display the setup menus.
2
Select Record Settings from the Edge Recording menu.
3
Select the Offline Record Settings tab.
4
In the Video Edge IP Address field, enter the IP address of the Video Edge recorder the
camera is connected to.
5
In the Pre event (secs) field, enter a time in seconds of the amount of time you want
recorded before the offline event.
6
In the Post event (secs) field, enter a time in seconds of the amount of time you wants
recorded after the offline event.
Event Download
If an event action has record mode enabled, when triggered, the associated video is logged in the
event download table where it can later be downloaded from an SD Card using the specified upload
protocol.
Note:An event action must have record mode enabled to be logged and downloaded. This is
configured in Event Actions under the Events and Actions menu.
114
Illustra Flex Series Installation and Configuration Guide
- End -
- End -
8200-1456-01 D0
Hide quick links:
Advertisement
Table of Contents
