Table of Contents
Advertisement
Security Status
This section summarizes the communication protocols that are used and their status. The following
communication protocols can be enabled: HTTP, FTP, CIFS, Dyn DNS, SMTP, HTTPS, SNMP
V1/2, SNMP V3, uPNP, and SFTP.
Security Overview
Procedure 98 Enable/Disable Communication Protocols
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Security Status from the Security menu.
3
Select the Security Overview tab.
4
Select or clear the Protocols check box to enable or disable that protocol.
5
Click Apply to save your settings.
Note:
When in Enhanced Security, enabling/disabling individual protocols requires the
admin account password.
Any changes to individual protocol settings are logged in the Security Log.
Security Log
The security log records any changes made to the security mode or to an individual protocol.
Procedure 99 Display Security Log
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Security Status from the Security menu.
3
Select the Security Log tab.
4
Select Refresh to refresh the log for the most up-to-date information.
Procedure 100 Filter the Security Log
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select Security Status from the Security menu.
3
Select the Security Log tab.
4
Enter the number of lines of the log file you would like to view in the Lines (from the end of
the log file) text box.
84
Illustra Flex Series Installation and Configuration Guide
- End -
- End -
8200-1456-01 D0
Hide quick links:
Advertisement
Table of Contents
