Table of Contents
Advertisement
Illustra Flex Series Installation and Configuration Guide
Installation
In the box
Check everything in the box matches the order form and the packing slip. In addition to his manual,
the items below are included in the box.
• 1 network Box Camera
• 1 2 position 3mm Euro style plug
• 1 printed Quick Start Guide
• 1 printed Regulatory document
Please contact your dealer if any item is missing.
Installation tools
Use the following tools to complete the installation:
• Drill
• Screwdriver
• Wire cutters
Checking appearance
When first taking the camera out of the box, check if there is any visible damage to the appearance of
the unit and its accessories. The protective materials used for the packaging should protect the unit
from most potential accidents during transportation.
Procedure 17 Connecting the wires
To connect the wires to the correct tables, complete the following steps:
Step Action
1
Connect the power cable to the power plugs with on of the following options:
a
DC 12V: Connect 12V( - ) to terminal = DC 12V-, and connect 12V( + ) to terminal =DC
12V+
b
AC 24V: Connect 24V (~) cables to terminals ~AC 24V
c
PoE: Connect the RJ-45 jack to a PoE compatible network device that supplies power
through the Ethernet cable.
2
Insert the audio cable and alarm cable to the unit, and connect the network cable to the RJ-
45 terminal of a switch.
8200-1456-01 D0
Icon
Description
Audio input
Audio output
28
Hide quick links:
Advertisement
Table of Contents
