Illustra IFS03D1ICWTT Installation And Configuration Manual page 56

When the camera is in B/W mode it can utilize or see near-IR illumination; something the human eye
cannot do. This can be extremely powerful when the dome is paired with 850~950nm IR illuminators.
With this combination a scene can be well lit with IR light that the dome can see but people cannot.
This is great for areas where externally lighting is not allowed or there is a need for covert security.
Procedure 41 Enable / Disable IR Illuminator
This feature is not supported on the Indoor Dome or Box camera. Refer to product codes for feature
support.
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional from the Basic Configuration menu.
3 Select the Enable IR Illuminator check box to enable IR Illuminator.
OR
Clear the Enable IR Illuminator check box to disable IR Illuminator.
The default setting is 'Enabled'.
Day Night Mode
The dome provides a black-and-white (B/W) mode to improve camera performance when the light
level falls below certain thresholds. This allows clear images to be obtained under low-light
conditions.
Procedure 42 Configure Day Night Mode
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional from the Basic Configuration menu.
3 Select a Day Night Mode setting from the drop-down menu:
• Forced Color - enable full-time color mode.
• Forced B&W - enable full-time black and white mode.
• Auto Low- camera will adjust between BW and Color depending on
light levels.
• Auto Mid - camera give a good balance of Color and BW depending on
the scene.
• Auto High - increases the chance of switching to BW mode as light
levels drop.
• Manual - a slider bar will display, the user can adjust the setting to suit
the environment.
The default setting is 'Auto Mid'.
Picture Adjustment
Adjust brightness, contrast and saturation of the image displayed on the video pane.
50
Illustra Flex Series Installation and Configuration Guide
- End -
- End -
8200-1456-01 D0