Table of Contents
Advertisement
Illustra Flex Series Installation and Configuration Guide
4
Select Start Calibration and wait for the camera lens initialization to complete.
5
To confirm the success of the lens calibration, select the Picture Basic tab from the
Picture Settings menu and verify that the image is in focus through the zoom range.
Use the OneTouch button to automatically focus the area.
Lens Selection
You can select the lens on the Illustra Flex Box camera. The lens models supported appear on the
Lens Selection tab of the Video menu.
Procedure 48 Perform a Lens Selection
Step Action
1
Select Setup on the Web Interface Banner to display the setup menus.
2
Select Picture Settings from the Video menu.
3
Select the Lens Selection tab.
4
In the Lens Model field, use the drop-down list to select the lens you installed.
5
When you change lenses, you are prompted to reboot the camera. All active sessions will be
lost. Select OK to proceed with reboot.
Date / Time / OSD
Change the camera name, date and time and enable OSD.
Camera Name
The camera name displays on the Web User Interface banner and the on-screen display for the
camera. This name also displays when using Illustra Connect or ONVIF.
Procedure 49 Change the Camera Name
Step Action
1
Select Setup on the Web User Interface banner.
2
Select the Date/Time/OSD tab in the Basic Configuration menu.
3
Enter the name of the camera in the Camera Friendly Name text box.
Date / Time
Set the date and time on the camera.
Procedure 50 Configuring the Date and Time
Step Action
1
Select Setup on the Web User Interface banner to display the setup menus.
2
Select the Date/Time/OSD from the Basic Configuration menu.
3
Select the Time 24-hour check box to enable the 24-hour clock.
8200-1456-01 D0
- End -
- End -
- End -
53
Hide quick links:
Advertisement
Table of Contents
