Table of Contents
Advertisement
Illustra Flex Series Installation and Configuration Guide
Index number
3
4
When removing the screws for the default/reset cover, ensure you replace and tighten the
CAUTION
screws to avoid water leaking after adjustment.
Connectors and field wiring terminals for external Class 2 circuits provided with marking
NOTE
indicating minimum Class of wiring should be used. Class 2 should be marked adjacent to the
field wiring terminals.
Installation
In the box
Check everything in the packing box matches to the order form and the packing slip. In addition to
this guide, items below are included in the packing box:
• 1 Network IR Bullet Camera
• 1 printed Quick Start Guide
• 1 printed Regulatory document
• 4 31mm screws and anchors
• 1 installation template sticker
• 1 Torx 10 and 20 Security L-Key
Contact your dealer if any item is missing.
Installation tools
The following tools assist with installation:
• a drill
• screwdrivers
• wire cutters
Checking appearance
When first unboxing, check whether if there is any visible damage to the appearance of the unit and
its accessories. The protective materials used for the packaging should be able to protect the unit
from most types of accidents during transportation.
Remove the protective part of the unit when every item is checked in accordance with the list in In
the box on page 22.
8200-1456-01 D0
Default: returns to factory default by pressing the button for five seconds
Reset: system restart
Name
22
Hide quick links:
Advertisement
Table of Contents
