Table of Contents
Advertisement
Illustra Flex Series Installation and Configuration Guide
The default setting is '(GMT-05:00) Eastern Time (US & Canada)
6
Select the Set Time setting by selecting the radio buttons:
• Manually
• via NTP
The default setting is 'Manually'.
7
If you select Manually in step 5:
a
Select the Date (DD/MM/YYYY) using the drop-down menus.
b
Select the Time (HH:MM:SS) using the drop-down menus.
8
If you select via NTP in step 5:
a
Enter the NTP Server Name in the text box.
Audio
You can configure the audio input, output, upload audio and stored audio clips, as well as configure
Audio Video Synchronisation on this tab.
Procedure 132 Configure Audio Input
Step Action
1
Select Audio from the System menu. The Audio Input tab displays.
2
Select the Input Enable check box to enable the audio input settings.
Or
Clear the Input Enable check box to disable audio input settings.
The default setting is 'Disabled'.
3
Use the slider bar to select the Input Volume.
Values range from 1 to 100.
The default setting is 72.
Procedure 133 Configuring Audio Output
Step Action
1
Select Audio from the Camera Configuration menu.
2
Select the Output Enable check box to enable the audio output settings.
Or
Deselect the Output Enable check box to disable audio input settings.
The default setting is 'Disabled'.
3
If Output Enable has been enabled, use the slider bar to select the Output Volume.
Values range from 1 to 100.
The default setting is 50.
8200-1456-01 D0
- End -
- End -
105
Hide quick links:
Advertisement
Table of Contents
