Volume; Call Transfer; Call Forward; Disable Call Forwarding - Polycom SoundPoint IP 601 User Manual

Volume
Call Transfer

Call Forward

End a Call
14
To turn off microphone mute, press
Press
Pressing these keys in the idle state adjusts the ringer volume.
NOTE: To conform to regulatory requirements, handset and headset volume
returns to a preset level after each call.
1. Press the Transfer button during a call. The active call is
placed on hold.
‐OR‐
Press the Trnsfer soft key during a call. The active call is placed
on hold.
2. Press the Blind soft key if you want to perform a blind transfer
(without informing the party to whom you are transferring).
3. Dial the number to which you want to transfer the call, or use
the arrow keys to access speed dial numbers, missed, placed,
or received call lists.
4. Press the Dial soft key.
5. Press the Transfer button or the Trnsfer soft key again.
You can forward calls to another extension in your location.
1. Press the Forward soft key from the phone's idle display
(select which line to forward of multiple lines are in use).
2. Enter the number or URL to which you want to forward the
call.
3. Press the Enable soft key.
Disable Call Forwarding
1. Press the Forward soft key from the phone's idle display
(select which line to forward of multiple lines are in use).
2. Press the Disable soft key.
To end a call, perform one of the following steps:
again.
to adjust the receiver volume during a call.