Digital proportional radio control system
To set the steering exponential/rate:
1.
Select the desired parameter, rate or exp.
2.
Use the wheel at the bottom of the screen to change the value.
To restore the entire function to default, select the reset icon located at the bottom center of the screen.
This function can be toggled using a switch/button, this is assigned in the [Keys function].
To restore the entire function to default, select the reset icon located at the bottom center of the screen.
Exponential 0%
6.3 Steering Speed
This function changes the speed in which the steering travels, if the cars wheels are turning too fast, it
could lead to loss of control, on the other hand if they don't change position fast enough the car will
become sluggish and slow to make turns. This function is also used to simulate a realistic for scale models.
There are two variables:
Turn Speed: Sets how quickly the wheels turn from their starting position, to the position the systems
controls indicates.
Return Speed: Sets how quickly the wheels turn back to their center position.
To set the steering speed:
1.
Select a parameter to change.
2.
Use the wheel at the bottom of the screen to change the value.
To restore the entire function to default, select the reset icon located at the bottom center of the screen.
6.4 Steering Mix
This function changes which wheels are involved in steering, front, rear, or 4 wheel steering. To enable this
function select "crawler mode" from the functions main menu.
16
FS-lT4S
Rate 64%