Subscribe to Our Youtube Channel
Related Manuals for Fly Sky FS-T6
Summary of Contents for Fly Sky FS-T6
- Page 9 FS-T6 T-6.10 Ch.1 Aileron Ch.2 Elevator Ch.3 Ch.4 Rudder Ch.5 Gyro Gain Ch.6 Pitch (Aileron 2) T-6.10.1 Ch.1 Aileron Ch.2 Elevator Ch.3 Ch.4 Rudder Ch.5 Gyro Gain Ch.6 Pitch (Aileron 2)
- Page 10 FS-T6 T-6.11 Definition of key functions 2.4Ghz Antenna Handle (Defalut Flight Mode Normal / IDLE for Storm 460) (Defalut Throttle Hold for Storm 460) (Defalut Not Used for Storm 460) (Defalut Not Used for Storm 460) (Defalut Dual Rate for Storm 460)
Need help?
Do you have a question about the FS-T6 and is the answer not in the manual?
Questions and answers
HOW TO SET UP FS-TS FOR A 4 CHANNEL AEROPLANE
The Fly Sky FS-T6 is a 6-channel transmitter, but for a 4-channel airplane setup, you need to connect the receiver channels properly:
1. Connect Receiver to Flight Controller or Servos
- Channel 1: Aileron
- Channel 2: Elevator
- Channel 3: Throttle
- Channel 4: Rudder
2. Power the Receiver
- Use the ESC (Electronic Speed Controller) to supply power to the receiver through the throttle channel.
3. Bind the Receiver
- Follow the FS-T6 binding process to link the transmitter and receiver.
4. Set Transmitter Mode
- Select "Plane" mode in the settings.
5. Check and Reverse Channels if Needed
- If any control moves in the wrong direction, reverse the corresponding channel in the transmitter settings.
6. Calibrate and Test
- Ensure all controls respond correctly before flying.
This setup ensures proper function for a 4-channel airplane using the FS-T6 transmitter.
This answer is automatically generated