Table of Contents
Advertisement
Preface
Agency Approvals
The SIMATIC S7-200 series meets the standards and regulations of the following agencies.
Underwriters Laboratories, Inc.:
UL 508 Listed
(Industrial Control Equipment)
Canadian Standards Association:
CSA C22.2 Number 142 Certified
(Process Control Equipment)
European Community EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC
How to Use This Manual
If this is your first experience using an operator interface, read the entire manual. If you are
an experienced user, refer to the Table of Contents or Index to find specific information.
Related Information
Refer to the following documentation for more detailed information about selected topics:
SIMATIC S7-200 Programmable Controller System Manual: provides information about
installing and programming the S7-200 Micro PLCs, including the following topics:
– Installing and wiring the S7-200 CPU and expansion I/O modules, and installing the
STEP 7–Micro/WIN software
– Designing and entering a program
– Understanding features of the CPU, such as data types and addressing modes, the
CPU scan cycle, password-protection, and network communication
This manual also includes descriptions and examples for the programming instructions,
typical execution times for the instructions, and the data sheets for the S7-200
equipment.
SIMATIC STEP 7–Micro/DOS User Manual: describes how to use the
STEP 7–Micro/DOS programming software package for the SIMATIC S7-200 series of
programmable logic controllers.
iv
SIMATIC TD 200 Operator Interface
C79000-G7076-C205-04
Advertisement
Table of Contents
