Table of Contents
Advertisement
Timer/Minute Minder
The hob is equipped with a timer that allows a finish time to be set
for the end of cooking on any zone, between a minimum of 1 minute
and a maximum of 119 minutes. This timer can be used separately
for each zone, and the timer activity indicator (3) will illuminate
faintly on each zone for which it is set and remain brightest on the
first zone to end. Once the timers are set, the timer display will show
the time remaining on the first zone to finish cooking. In normal use,
the timer ending prompts the zone heating to end as well. However
the timer can also be used as a minute minder to count down time
without halting heating.
Please note: At the end of the timer, the selected zone will switch off
and the timer indicators will flash. The hob will beep for approximately
two minutes. To switch off the beep, touch the timer minus and plus
setting sensors (5 & 7) simultaneously. This beeping also occurs after
the minute minder time has elapsed and the same process to switch
off the beep applies.
If no time is set within 5 seconds of activating the timer, then it will
deactivate automatically.
To set the timer
•
First switch on the hob if necessary and set the desired zone to the
power level required.
•
Touch the timer minus setting sensor (5) and the timer plus setting
sensor (7) simultaneously. The timer display (6) will illuminate.
•
A clock symbol (the timer activitiy indicator) will appear next to the
power level of the leftmost active zone. This clock indicates which
11
Advertisement
Table of Contents
