Removing the touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
Procedure
1
Open the latch, and disconnect the status-light board cable from the system
board.
2
Peel-off the status-light board cable from the touch-pad assembly and place it
away from the palm-rest assembly.
50
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before