Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 17 7000 Service Manual

Removing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base
2 Remove the battery.
3 Remove the wireless

Procedure

1 Peel off the tape that secures the antenna cables to the palm-rest assembly.
2 Peel off the tapes that secure the display cable and touch-screen board cable to
the system board.
3 Open the latches and disconnect the display cable and the touch-screen board
cable from the system board.
computer. After working inside your computer, follow
After working inside your
cover.
card.
computer. For more safety best
www.dell.com/
Before
73