Replacing The Graphics Daughter-Board; Procedure; Post-Requisites - Dell Inspiron 17 7000 Service Manual

Replacing the graphics daughter-
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw holes on the graphics daughter-board with the screw holes on
the palm-rest assembly.
2 Replace the two screws (M2x2 Big Head) that secure the graphics daughter-
board to the palm-rest assembly.
3 Align the screw holes on the graphics daughter-board brackets with the screw
holes on the graphics daughter-board and the system board.
4 Replace the four screws (M2x3) that secure the graphics daughter-board
brackets to the graphics daughter-board and the system board.

Post-requisites

1 Replace the heat
2 Replace the battery.
3 Replace the base
computer. After working inside your computer, follow
After working inside your
sink.
cover.
computer. For more safety best
www.dell.com/
Before
69