Table of Contents
Advertisement
OPERATION
WARNING: NEVER TOUCH THE SANDING DISC OR BELT WHILE IT IS
MOVING, DO NOT TOUCH THE WORK PIECE AFTER SANDING, IT COULD BE
VERY HOT.
WARNING: ALWAYS WEAR SAFETY GLASSES WHEN OPERATING THE
SANDER
CAUTION: ALWAYS MAKE SURE THE WORK TABLE AND BACKSTOP ARE
PROPERLY ADJUSTED AND SECURE BEFORE USE.
ON/OFF BUTTONS
The On/Off buttons are located on
the front of the sander.
1. Press the GREEN button (I) to turn
the sander on.
2. Press the RED button (0) to turn the
sander off.
• If the power supply is
interrupted for any reason, the unit will automatically switch off.
When power is restored, press the GREEN button to resume work.
RESET BUTTON
The machine is fitted with a thermal overload protector. If the motor stops
running or fails to start:
1. Wait 5 minutes and then press the reset button.
• If the reset button continually activates contact your CLARKE dealer.
BELT SANDING
HORIZONTAL AND VERTICAL SANDING
The sanding belt can be used in the
vertical or horizontal position,
depending on operator needs and
the workpiece.
To change from one position to the
other:
12
Hide quick links:
Advertisement
Table of Contents
