Table of Contents
Advertisement
Available languages
Available languages
Quick Links
Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco's only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.
Advertisement
Chapters
Table of Contents
Related Manuals for Clarke 01281A
Summary of Contents for Clarke 01281A
- Page 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this docu- ment. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufac- turer which provided the original information in this electronic deliver- able.
- Page 2 This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke American Sanders machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
-
Page 3: Table Of Contents
Products in such environments. The Manufacturer disclaims any responsibility to advise purchasers of any specifi c requirements that may be applicable to the use of the Products in such environments. Clarke ®... -
Page 4: English En
Read all machine labels before attempting to operate. Make sure all of the labels and instructional information are attached or fastened to the machine. Get replacement labels and decals from your authorized distributor. Clarke ® Operator's Manual (EN) - CFP Polisher... -
Page 5: Introduction
NOTE: This machine is intended for commercial use. MACHINE INTRODUCTION This product is intended for commercial use; polishing, spray buffi ng, scrubbing, stripping and rotary carpet shampooing. Clarke ® - 4 - FORM NO. 70880A Operator's Manual (EN) - CFP Polisher... -
Page 6: Accessories
80242A 80242A 80242A Retainer (LH Gray, fi ts above) 56927A 56927A 56927A 56927A 56927A 56927A 56927A WARNING: Use only brushes and accessories supplied by the manufacturer. Clarke ® Operator's Manual (EN) - CFP Polisher FORM NO. 70880A - 5 -... -
Page 7: Machine Specifi Cations
ENGLISH Machine Specifi cations Model CFP 130 Part Number 01281A Voltage (Volts) Frequency (Hz) Current (Amps) 12.6 Pad /Brush Speed 175 rpm Pad/Brush Size 13” (33 cm) Power 1 hp (0.75 kW) Gearbox 2 - Planet Cord Length 50’ (15 m) -
Page 8: How To Prepare The Machine For Operation
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can be inspected. Contact the Clarke Customer Service Department. KNOW YOUR MACHINE (Figure 1) -
Page 9: Grounding Instructions
WARNING: If you use an extension cord, use an extension cord with minimum wire size 12 AWG. Do not use an extension cord longer than 50 feet. Do not join two extension cords. Clarke ® - 8 - FORM NO. 70880A Operator's Manual (EN) - CFP Polisher... -
Page 10: How To Operate The Machine
Perform any required maintenance or repairs before storage. Store the machine in a clean, dry place with the Operator Handle (6) locked in the upright position. Clarke ® Operator's Manual (EN) - CFP Polisher FORM NO. 70880A - 9 -... -
Page 11: Troubleshooting
• Call for service. LIGHT ON 1700DS / 2000DS MOTOR ILLUMINATES • Stop operating machine within 6 hours • Call for service • Replace carbon motor brushes. Clarke ® - 10 - FORM NO. 70880A Operator's Manual (EN) - CFP Polisher... - Page 12 ENGLISH NOTES Clarke ® Operator's Manual (EN) - CFP Polisher FORM NO. 70880A - 11 -...
- Page 13 Todas las indicaciones de dirección dadas en este libro están dadas desde la posición del operador en la parte de atrás de la máquina. Puede Ud. conseguir libros suplementarios dirigiéndose a su distribuidor Clarke. INDICE Instrucciones de seguridad para el operador ................13 Presentación de la máquina ....................14...
-
Page 14: Instrucciones De Seguridad Para El Operador
Procure que los componentes eléctricos sean siempre secos. Seque cuidadosamente la máquina después de cada utilización. Guarde la máquina en un local seco. Clarke ® Manual del operador (ES) - CFP Polisher FORM NO. 70880A - 13 -... -
Page 15: Presentación De La Máquina
Compruebe que todos los adhesivos y las instrucciones estén colocados en los sitios previstos. Si es preciso, haga un nuevo pedido a su distribuidor Clarke. ¡ AVISO ! No use la máquina como escabel o mueble. Corre el peligro de causar lesiones o daños materiales. -
Page 16: Accesorios
Rentenedor (Izquierda gris, encaja en el ítem anterior) 56927A 56927A 56927A 56927A 56927A 56927A 56927A AVISO: Utilice únicamente las escobillas y los accesorios suministrados por el fabri- cante. Clarke ® Manual del operador (ES) - CFP Polisher FORM NO. 70880A - 15 -... -
Page 17: Especifi Caciones De La Puilidora
ESPAÑOL Especifi caciones de la pulidora Modelo CFP 130 Número de código 01281A Tensión (V) Frecuencia (Hz) Corriente (A) 12.6 Velocidad de la 175 rpm almohadilla/el cepillo Tamaño de la 13” (33 cm) almohadilla/el cepillo Potencia 1 hp (0.75 kW) Transmisión... -
Page 18: Preparación De La Máquina Para Trabajar
Si hay algún daño evidente, guarde la caja de embarque de modo que se la pueda inspeccio- nar. Comuníques con el Departamento de Atención al Cliente de Clarke. FAMILIARÍCESE CON SU MÁQUINA (Figura 1) Manijas para el operador Botón de cierre de seguridad de la palanca de... -
Page 19: Instrucciones Para La Conexión Con La Red 120 V
¡ AVISO !Use un añadido de cable de 12 AWG de sección. No use ningún añadido de más de 50 pies de largo. Nunca conecte dos añadidos. Clarke ® - 18 - FORM NO. 70880A Manual del operador (ES) - CFP Polisher... -
Page 20: Funcionamiento De La Máquina
Guarde la máquina en un lugar limpio y seco, con la manija para el operador (6) trabada en posición vertical. Clarke ® Manual del operador (ES) - CFP Polisher FORM NO. 70880A - 19 -... -
Page 21: Detcción De Problemas
SE ILUMINA LUZ EN EL MOTOR 2000DS • Detenga el funcionamiento de la máquina en 6 horas. • Llame al servico técnico. • Reemplace las escobillas de carbón del motor. Clarke ® - 20 - FORM NO. 70880A Manual del operador (ES) - CFP Polisher... - Page 22 ESPAÑOL Clarke ® Manual del operador (ES) - CFP Polisher FORM NO. 70880A - 21 -...
- Page 23 Toutes les indications de direction fi gurant dans ce manuel sont visualisées depuis la position du conducteur, à l’arrière de la machine. Pour toute commande de manuels, adressez-vous à votre revendeur Clarke. INDEX Consignes de sécurité pour l’opérateur ......................23 Présentation de la machine ..........................
-
Page 24: Consignes De Sécurité Pour L'opérateur
Risque de court-circuit si les composants électriques d’une machine ont été exposés à l’humidité ou sont mouillés. Veillez à ce que les composants électriques soient toujours secs. Essuyer soigneuse- ment la machine après chaque utilisation. Entreposer la machine dans un local sec. Clarke ® Manuel de l’utilisateur (FR) - CFP Polisher... -
Page 25: Présentation De La Machine
fi gurant sur la machine avant la première utilisation. Vérifi ez que tous les auto- collants et les instructions sont positionnés aux endroits requis . Au besoin, recommandez-en chez votre revendeur Clarke. AVERTISSEMENT Ne pas utiliser cette machine comme escabeau ou comme meuble. Risque de blessure ou de dégât matériel. -
Page 26: Accessoires
Dispostif de retenue (LH Gray, s’adapte sur la pièce ci-dessus) 56927A 56927A 56927A 56927A 56927A 56927A 56927A AVERTISSEMENT: N’utiliser que les brosses et accessoires fournis par le fabricant. Clarke ® Manuel de l’utilisateur (FR) - CFP Polisher FORM NO. 70880A - 25 -... -
Page 27: Spécifi Cations De La Cireuse De Série C2K
FRANÇAIS Spécifi cations de la cireuse de CFP Modèle CFP 130 Numéro de code 01281A Tension (volts) Fréquence (Hz) Courant (Amps) 12.6 Vitesse du patin/brosse 175 rpm Tailee du patin/brosse 13” (33 cm) Puissance 1 hp (0.75 kW) Transmission 2-étages planétaires Longueur du câble... -
Page 28: Préparation De La Machine Avant La Mise En Service
Si elles sont endommagées, conservez la boîte d’emballage afi n qu’elle puisse être inspectée. Contactez im- médiatement le service d’entretien Clarke. CONNAÎTRE VOTRE MACHINE (Figure 1) Prises de la poignée de l’opérateur Bouton de verrouillage de sécurité... -
Page 29: Instructions Pour Le Raccordement Au Réseau 120V
! AVERTISSEMENT ! Utilisez un câble de rallonge d’une section de 12 AWG. N’utilisez pas de rallonge d’une longueur supérieure à 50 pieds. Ne raccordez jamais deux rallonges. Clarke ® - 28 - FORM NO. 70880A Manuel de l’utilisateur (FR) - CFP Polisher... -
Page 30: Fonctionnement De La Machine
Conservez la machine dans un lieu propre et sec, avec la poignée de l’opérateur (6) verrouillée en position verticale. Clarke ® Manuel de l’utilisateur (FR) - CFP Polisher FORM NO. 70880A - 29 -... -
Page 31: Diagnostic
LE TÉMOIN LUMINEUX DU MOTEUR 2000DS S’ALLUME • Cessez d’utiliser la machine dans les 6 heures. • Contactez le service de réparation. • Remplacez les balais en carbone du moteur. Clarke ® - 30 - FORM NO. 70880A Manuel de l’utilisateur (FR) - CFP Polisher... - Page 32 CFP Series 120V & 230V Section II Parts and Service Manual (70880A) Operator's Manual- CFP Polisher FORM NO. 70880A - 31 - ® Clarke...
-
Page 33: Assembly Drawing
Clarke ® CFP-130, 170, 1700, 1700DS, 200, 2000, 2000DS Assembly Drawing 1/10 22 19 18 - 32 - FORM NO. 70880A Operator's Manual- CFP Polisher ® Clarke... -
Page 34: Assembly Parts List
Pg. 32,33 Motor/Gearbox (CFP-1700DS, 2000DS) 61716A Drip Cover (CFP-130, 170, 200, 1700, 2000) 61717A Drip Cover (CFP-1700DS, 2000DS) 21088A Mainframe 73323A Label, Motor Clarke 61844A Housing (CFP-130) 50972A Bumper (CFP-130) 11006A Housing, Asm. (CFP-170, 1700, 1700DS) * See "Accessories" 61715A... -
Page 35: Motor Assembly Drawing & Parts List
Clarke ® CFP-130,170, 1700, 200, 2000 Motor Assembly Drawing, Parts List and Schematics 3/08 START MODEL CFP- 130,170, 200 170, 200 1700, 2000 1700, 2000 VOLTS / Hz 120 / 60 230 / 50 120 / 60 230 / 50... -
Page 36: Gearbox Assembly Drawing & Parts List
Clarke ® CFP-130, 170, 1700, 200, 2000 Gearbox Assembly Drawing & Parts List 7/07 MODEL CFP- 130, 170, 200 170, 200 1700, 2000 1700, 2000 VOLTS / Hz 120 / 60 230 / 50 120 / 60 230 / 50... -
Page 37: Motor (Dual Speed) Assembly Drawing & Parts List
Clarke ® CFP-1700DS, 2000DS Motor Assembly Drawing, Parts List and Schematic 7/07 MOTOR 40764A Part No. Description Qty. Commutator Bracket 912287 Rectifi er, Bridge 448396 Spring (Included with #8) 51405A Brush Asm., (Included w/#8) 51435A Brush Board Asm. (incl #’s 6,7,16, 18,19) -
Page 38: Gearbox (For Dual Speed) Assembly Drawing & Parts List
Clarke ® CFP-1700DS, 2000DS Gearbox Assembly Drawing & Parts List 7/07 GEARBOX 53647A Part No. Description Qty. 80141A Screw, 10-32 x 1 56922A Retainer, Bearing 902606 Bearing, Ball - 6002 58520A Spacer, Sleeve 53849A Plate, Mounting 84808A Screw 10-24 x 3/4... - Page 39 NOTES Page - 38 - 70880A Operator's Manual- CFP Polisher Clarke ®...
- Page 41 14600 21st Avenue North Plymouth, MN 55447-3408 www.clarkeus.com Phone: 800-253-0367 Fax: 800-825-2753 ©2010 Nilfi sk-Advance, Inc. A Nilfi sk-Advance Brand...
Need help?
Do you have a question about the 01281A and is the answer not in the manual?
Questions and answers