Zte ZXHNF660 User Manual page 7

Figure 4-1
Table 4-1 describes the interfaces and buttons on the back panel of the ZXHN
F660 unit.
Table 4-1
Interface/Button
On/Off
Power
USB
Reset
Wi-Fi
WPS
LAN1 – LAN4
Phone1 – Phone2
PON
Description
Power switch.
12 V DC power connector.
USB 2.0 interface.
Reset button, when the power is on, use a needle to press
the button for over 5 seconds to restore the default settings.
Enable/disable the Wi-Fi function.
Enable/disable the Wi-Fi protection. When the Wi-Fi
protection is enabled, users can access the network without
password.
RJ-45 Ethernet interface.
RJ-11 telephone interface, connected to the telephone with
RJ-11 telephone cable.
PON interface.