Polycom 8 Quick Start Manual page 19

Table 2-1: MCU Properties Fields
Field
Password
ISDN Prefix
H.323 Prefix
First Number
Last Number
MGC Personal Scheduler Quick Start Guide
Description
The password used when connecting to the MCU.
The first digits of the MCU number that are added at
the beginning of the dial-in number allocated by the
MCU. The full dial-in number is allocated by the
service provider that supplies the phone line - as the
call passes through the PBX, the MCU truncates
part of the full number.
This number is configured in the MGC Manager
application. For details on this prefix, ask your
System Administrator or MCG Manager operators.
The MCU prefix that is added to the conference
name. This number appears in the conference
e-mail signature that is sent to conference
participants.
This prefix must be the same number that is defined
in the Gatekeeper - the number is defined in the
MGC Manager in the Network Services Properties
dialog box, Gatekeeper tab.
The first phone number in the range of dial-in
numbers that can be allocated by the MCU. These
numbers are added to the Prefix number to compose
the complete number dialed by participants when
connecting to the MCU. For example if you enter
1000, and the prefix is 97865, the first dial in number
in the range is 978651000.
The last phone number in the range of dial-in
numbers that can be allocated by the MCU. These
numbers are added to the Prefix number to compose
the complete number dialed by participants when
connecting to the MCU. For example if you enter
9999, and the prefix is 97865, the last dial in number
in the range is 978659999.
2-11