About Recorder Functions - Philips DigiTrak XT Instructions For Use Manual

Using the DigiTrak XT Recorder

About Recorder Functions

The following table describes the recorder screens and menus.
Table 1-1
Screen
Lead Status
CH1, CH2, CH3 Displays the signal trace in real time with pacer pulse marks, if
Settings
Date/Time
1-6 DigiTrak XT Recorder Instructions for Use
DigiTrak XT recorder functions
Description
Displays the connection status of each lead.
selected. There is one screen for each ECG channel.
The gain setting is the same for all channels and is displayed in
the lower right corner of the screen.
If Pacer Detector is on, the pacer pulse marks are displayed
below the trace to indicate each pacer pulse detection and you
can adjust the threshold for pacemaker spike detection.
Determines the following recorder settings:
Record Time –
Pacer Detector –
It must be turned
or saved as part of the default settings.)
Language –
English, Spanish, German, French, Italian, Portuguese,
Swedish, Dutch
Contrast –
20- 95%
Sample Rate –
Resolution –
10 bit
Save as Default –
saves the current configuration (including date and time
No. Yes
settings) as the default.
Set the following date and time options:
Month, Day, Year
Date Format –
YYYY/DD/MM
Hour and Minute
Auto DST –
ON
States convention.
Time Format –
hr
24, 48, 72, 96, 168
or . (The default for pacer detect is
ON OFF
for each procedure in which it will be used
ON
175 s/s
or The default for saving settings is
Yes No.
MM/DD/YYYY, YYYY/MM/DD, DD/MM/YYYY,
or . Daylight savings time uses the United
OFF
or
12 24 hr
.
OFF