Download  Print this page

During A Recording - Philips DigiTrak XT Instructions For Use Manual

Holter recorder.
Hide thumbs

Advertisement

Observe the screen for cable and lead errors as follows.
7
When all the leads are properly connected, the ECG waveform appears.
8
Use the arrow buttons to change the gains settings of the display, as shown in the
9
following table.
N O T E
The recording for all resolutions is always made at the 1X gain setting.
Table 1-2
Gain on screen
0.5X
1X
2X
Proceed to
10
Use the arrow buttons to select the
11
N O T E
If you do not start the recording, the DigiTrak XT automatically starts recording after 30 minutes,
provided there are no lead errors.

During a Recording

During a recording, the DigiTrak XT displays the date, current time, and the time remaining
for the recording as well as any lead or cable error, if present.
Gain Settings
Millivolt range
± 5 peak-to-peak
± 2.5 peak-to-peak
± 1.25 peak-to-peak
and select
Settings
Pacer Detector
, if applicable.
tab and press
Start
Enter
DigiTrak XT Recorder Instructions for Use
Getting Started
to start the recording.
1-15

Advertisement

Table of Contents

   Related Manuals for Philips DigiTrak XT

Comments to this Manuals

Symbols: 0
Latest comments: