Registering An Event (Patient Event Marker) - Philips DigiTrak XT Instructions For Use Manual

Using the DigiTrak XT Recorder
N O T E The Enter button toggles between the pacemaker threshold indicator and the gain setting.
Check to see if there are pacer pulses in the pacer detection channel on the bottom of the
4
screen.
If there are many pacer pulses in the pacer detection channel and less or none in the ECG
5
channel, reduce the sensitivity of the pacemaker threshold indicator.
If there are no pacer pulses in the pacer detection channel and there are pacer pulses in the
6
ECG channel, increase the sensitivity of the pacemaker threshold indicator.
Use the arrow buttons to select the
7
are satisfied that the correct pacer pulses are being detected.

Registering an Event (Patient Event Marker)

The DigiTrak XT allows an easy way for the patient to record events. Once an event has been
marked, the patient must wait one minute to register another event.
To register an event
Press
The marked event time stamp appears on the recorder screen. After 20 seconds have
elapsed, the time stamp is cleared from the recorder screen.
1-18 DigiTrak XT Recorder Instructions for Use
each time to mark an event.
Enter
tab and press to start the recording when you
Start Enter