Fluke DTX-CLT CertiFiber User Manual page 71

Figure 28. Updating the Software with a PC
Updating with Another Tester
You can update a tester's software using another tester that
is already updated.
1 Make the connections shown in Figure 29.
One of the testers must be a main tester.
2 Turn on both testers. The testers compare software
versions. If one has more recent software, the main
tester prompts you about updating the older software.
K
3 Press
4 To verify the update, turn the rotary switch to SPECIAL
FUNCTIONS; then select Version Information.
Updating the Limits or Cable Types Database
Fluke Networks may release a test limits or cable types
database that is not part of a software update. To install a
new database in your tester, use the Modify DTX Test Limits
utility in LinkWare software. See the LinkWare online help
for details.
gfd01.eps
Note
OK to start the update process.
Maintenance
63