Fluke DTX-CLT CertiFiber User Manual page 16

DTX-CLT CertiFiber Optical Loss Test Set
Users Manual
C
D
Figure 2. Tester Side and Top Panel Features
8
A
B
E
gfd04f.eps
A
Fiber module. See Figure 4.
B
Bail.
C
USB port for uploading test reports to a PC and for
updating the tester's software.
D
Headset jack for talk mode.
E
Connector for the ac adapter. The LED turns on when
the tester is connected to ac power.
• Red: Battery is charging.
• Green: Battery is charged.
• Flashing red: Charge timeout. The battery failed to
reach full charge within 6 hours. See "Powering the
Tester" on page 14.