Interfaces And Buttons - Zte ZXHN H198A User Manual

Indicator Status
Off
USB1,
Solid green
USB2
Flashing green Data is being transmitted on the interface.
4

Interfaces and Buttons

Figure 4-1 shows the interfaces and buttons on the back panel of the ZXHN
H198A.
Figure 4-1 Interfaces and Buttons on the Back Panel
Table 4-1 describes the interfaces and buttons on the back panel of the ZXHN
H198A.
Table 4-1 Descriptions of the Interfaces and Buttons on the Back Panel
Interface/Button
On/Off
Power
Reset
2.4GHz
Description
The device is not powered on or the USB
interface is not connected.
The USB interface is connected and operating
in host mode, but no data is being transmitted.
Description
Power switch.
12 V DC power connector.
Reset button, when the power is on, use a needle
to press the button for over 5 seconds to restore
the default settings.
WLAN button for enabling or disabling the 2.4GHz
WLAN function.