Table of Contents
Advertisement
20
www.electrolux.com
12.1 What to do if...
Problem
You cannot activate or op-
erate the oven.
The oven does not heat up. The oven is deactivated.
The oven does not heat up. The clock is not set.
The oven does not heat up. The necessary settings are
The oven does not heat up. The automatic switch-off is
The oven does not heat up. The Child Lock is on.
The oven does not heat up. The fuse is blown.
The lamp does not operate. The lamp is defective.
The display does not show
the time during the off sta-
tus.
The core temperature sen-
sor does not operate.
It takes too long to cook the
dishes or they cook too
quickly.
Steam and condensation
settle on the food and in the
cavity of the oven.
The display shows "C2".
Possible cause
The oven is not connected
to an electrical supply or it
is connected incorrectly.
not set.
activated.
The display is deactivated.
The plug of the core tem-
perature sensor is not cor-
rectly installed into the
socket.
The temperature is too low
or too high.
You left the dish in the oven
for too long.
You want to start the De-
frost function, but you did
not remove the core tem-
perature sensor plug from
the socket.
Remedy
Check if the oven is correct-
ly connected to the electri-
cal supply (refer to the con-
nection diagram if available).
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse is blown
again and again, contact a
qualified electrician.
Replace the lamp.
Touch
and
at the
same time to activate the
display again.
Put the plug of the core
temperature sensor as far
as possible into the socket.
Adjust the temperature if
necessary. Follow the ad-
vice in the user manual.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
Remove the core tempera-
ture sensor plug from the
socket.
Advertisement
Table of Contents
