Automatic Programmes - Electrolux EBGL4CN User Manual

7. Use
to confirm. First you set the minutes
and then the hours.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds for 2 minutes.
and the time setting flash in the
display. The appliance deactivates
automatically.
8. Touch a sensor field to stop the
acoustic signal.
9. Turn off the appliance.
7.6 Setting the MINUTE MINDER
1. Touch
and "00" flash in the display.
2. Use
First you set the seconds, then the
minutes and the hours.

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to Safety chapters.
There are 9 automatic programmes. The
display shows the default cooking times
for all automatic programmes. You can
find the recipes for the automatic
programmes in the "Recipe book".
8.1 Automatic programmes
1. Activate the appliance.
2. Touch
The display shows the number of the
automatic programme (1 – 9).
3. Touch
automatic programme.
4. Touch
the appliance automatically starts to
work.
5. When the set time ends, an acoustic
signal sounds for two minutes. The
symbol
6. Touch a sensor field to stop the
acoustic signal.
7. Deactivate the appliance.
or to set the END and
.
to switch between options.
.
or to choose the
or wait five seconds until
flashes.
3. Use or to set the MINUTE
MINDER and
4. Touch or the MINUTE MINDER
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes and 00:00
and flash in the display.
5. Touch a sensor field to stop the
acoustic signal.
7.7 COUNT UP TIMER
To reset the Count Up Timer, touch
and at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
8.2 Automatic programmes with
weight input
If you set the weight of the meat, the
appliance calculates the roasting time.
1. Activate the appliance.
2. Touch
.
3. Touch or
programme. Refer to the "Recipe
book".
The display shows: the cooking time, the
duration symbol , a default weight, a
unit of measurement (g).
4. Touch or the settings save
automatically after five seconds.
The appliance activates.
5. You can change the default weight
value with or
6. When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
7. Touch a sensor field to stop the
acoustic signal.
8. Deactivate the appliance.
ENGLISH
to confirm.
to set the weight
. Touch .
13