Microwave Data Systems iNet 900 Quick Start Manual page 33

Navigation
Help
Logging In and
Password
Logging Out
MDS 05-2873A01, Rev. A
DRAFT 6—8/29/01
Figure 15. Management Toolbox Start-up Screen
From the you navigate by pressing the key to the left of the
Main Menu
offering. You will then be taken to a screen associated with that func-
tion. If you select a menu item that is not user-configurable, the message
"
Note: This is not a configurable item.
key will navigate you to the previous menu or level.
Pressing F1 from any menu will place the Management Toolbox in the
Help mode; pressing the key corresponding to the menu item will pro-
vide you with useful information or instructions. Pressing the
key will exit the Help Mode and return you to the previous screen.
All screens are accessible to any user. To change a user-controllable
parameter, you must log into the system and enter a password. The
default user password is "
item will change from
logged out after 10 minutes of inactivity.
If you know that you want in advance to change one or more parameter,
you should log in from the Main Menu.
Once you are logged in, you can go to the
change the password (case-sensitive). Follow any changes to the pass-
word or other parameters with an
1. This is a guess. Please verify value and function
MDS iNet 900 Installation and Operation Guide
Invisible place holder
" in lowercase letters. The main menu
admin
to . The user will automatically be
Login Logout
1
Z?
System Configuration Menu
key to save the change.
ENTER
" Pressing the
ESCAPE
ESCAPE
and
25