Cleaning The Rollers; Using The Cleaning Plate To Clean The Rollers - Kodak Point-of-Care CR 120 Hardware Manual

Using the Scanner

Cleaning the Rollers

Using the Cleaning
Plate to Clean the
Rollers
2-4
Slightly push the cassette into the scanner.
3.
The scanner status indicates "Loading Cassette." The screen is
automatically "pulled" and loaded into the Scanner. When the screen is
loaded, the status changes to "Ready for Scan."
You can now scan, erase, or unload the screen. For further instructions,
refer to the Kodak Point-of-Care CR 120/140 System Software Guide.
NOTE: If you do not take any action within two minutes, the cassette is
automatically ejected, and a message is displayed.
Periodically clean the rollers to remove dust and small particles. The
roller-cleaning device enables you to clean the rollers that feed the
screenscreenfrom the cassette into the Scanner.
The cleaning device includes the following items:
• Cleaning Tray
• Cleaning Plate with adhesive strips covered with protective paper / a
protective envelope.
Remove any cassettes and screens from the Scanner.
1.
Open the Kodak QC software.
2.
In the Scanner Interface, click the Setup button.
3.
The Password dialog box opens.
Click Login.
4.
The User screen opens.
In the User tab, click the Prepare button.
5.
6H8044