Identification; Application - ABB REB670 Applications Manual

Section 12
Control
12.10.1
12.10.2
404

Identification

Function description
Single command, 16 signals

Application

Single command, 16 signals (SINGLECMD) is a common function and always
included in the IED.
The IEDs may be provided with a function to receive commands either from a
substation automation system or from the local HMI. That receiving function block has
outputs that can be used, for example, to control high voltage apparatuses in
switchyards. For local control functions, the local HMI can also be used. Together with
the configuration logic circuits, the user can govern pulses or steady output signals for
control purposes within the IED or via binary outputs.
Figure 181 shows an application example of how the user can connect SINGLECMD
via configuration logic circuit to control a high-voltage apparatus. This type of
command control is normally carried out by sending a pulse to the binary outputs of
the IED. Figure 181 shows a close operation. An open breaker operation is performed
in a similar way but without the synchro-check condition.
Single
command
function
SINGLECMD
Close CB1
CMDOUTy
OUTy
ANSI04000206 V2 EN-US
Figure 181: Application example showing a logic diagram for control of a circuit
breaker via configuration logic circuits
Figure 182 and figure 183
Enabled/Disabled signals. Here, the output is used to control built-in functions or
external devices.
IEC 61850
identification
SINGLECMD
Configuration logic circuits
User-
AND
defined
conditions
Synchro-
check
show other ways to control functions, which require steady
1MRK 505 370-UUS A
GUID-2217CCC2-5581-407F-A4BC-266CD6808984 v1
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
en04000206_ansi.vsd
Busbar protection REB670 2.2 ANSI
Application manual
M12445-3 v3