Allen-Bradley PowerFlex 525 User Manual page 113

www.aotewell.com
N-Files (Multi-Drive)
N-File Description
N44 This N-file lets you read and write control I/O messages. You can write control I/O messages only when
all of the following conditions are true:
• The adapter is not receiving I/O from a scanner. For example, there is no scanner on the network,
the scanner is in idle (program) mode, the scanner is faulted, or the adapter is not mapped to the
scanner.
• The value of N42:3 is set to a non-zero value.
Write
N44:0
Drive 0 Logic Command
N44:1 Unused
N44:2 Drive 0 Reference
N44:3 Drive 1 Logic Command
N44:4 Drive 0 Reference
N44:5 Drive 2 Logic Command
N44:6 Drive 2 Reference
N44:7 Drive 3 Logic Command
N44:8 Drive 3 Reference
N44:9 Drive 4 Logic Command
N44:10 Drive 4 Reference
Rockwell Automation Publication 520COM-UM001A-EN-E - April 2013
sales@aotewell.com
Industry Automation
DeviceNet Objects Appendix C
Read
Drive 0 Logic Status
Unused
Drive 0 Feedback
Drive 1 Logic Status
Drive 1 Feedback
Drive 2 Logic Status
Drive 2 Feedback
Drive 3 Logic Status
Drive 3 Feedback
Drive 4 Logic Status
Drive 4 Feedback
+86-755-8660-6182
113