Cooling Fan - Progress PBD46100X User Manual

18 Progress
Description
1 SET+GO
2 RESIDUAL HEAT INDICATOR
3
KEY TONE
4 FAULTY TONE
5 SERVICE MENU
6 RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is activated, touch
then touch it again and hold for
three seconds.
The display shows SET1 and "1" flashes.
2. Touch
or
3. Touch
.
4. Touch or
the setting.
5. Touch .
To exit the Settings menu, touch
touch and hold .
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time if
an oven function operates and you do not
change any settings.
Temperature (°C)
30 - 115
120 - 195
200 - 230
After the Automatic switch-off, touch a
sensor field to operate the appliance again.
The Automatic switch-off does
not work with the functions:
core temperature sensor, Light,
Slow Cooking, Duration, End,
Time delay.
1)
to set the setting.
to change the value of
or
Switch-off time
(h)
12.5
8.5
5.5
Value to set
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
-
YES / NO
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next 10
seconds.
– if the appliance is deactivated and
you set the Minute Minder. When the
Minute Minder function ends, the
display goes back to the night
brightness.

Cooling fan

When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appliance
cools down.