Clock Functions - Progress PBD46100X User Manual

Table of Contents

Advertisement

12 Progress
2. Fill the water drawer with 800 ml of
water.
The water supply is sufficient for
approximately 50 minutes.
3. Push the water drawer to its initial
position.
4. Activate the appliance.
5. Set the steam function (refer to the
"Oven functions" table) and the
temperature.
6. If necessary, touch
DURATION
to "Setting the END" or "Setting the
DURATION").
The first steam shows after approximately 2
minutes. An acoustic signal sounds when

CLOCK FUNCTIONS

Clock functions table
Clock function
COUNT UP TIMER
TIME OF DAY
DURATION
END
SET+GO
Count Up Timer
The Count Up Timer is not
activated if Duration and End are
set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch
2. Touch
until the display shows
"00:00" and the Count Up Timer starts
to count up again.
to set the
or END
function (refer
Application
To set the count up, which shows how long the appliance
operates. This function has no effect on the operation of the
appliance.
To show the time of day. To change the time of day, refer to
"Setting the time".
To set how long the appliance operates.
To set when the appliance deactivates. You can use Dura-
tion and End at the same time (Time delay) if you want the
appliance to activate and deactivate automatically later.
To start the appliance with necessary settings with only one
touch of the sensor field any time later.
the appliance is at approximately the set
temperature. The signal sounds again at
the end of the cooking time.
7. Touch
to deactivate the acoustic
signal and the appliance.
When the steam generator is
empty, an acoustic signal
sounds.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with the
door open.
Setting the DURATION
1. Activate the appliance and set an oven
function and temperature.
2. Touch
again and again until the
display shows
flashes in the display.
3. Use
or
.
DURATION.
4. Touch
5. Use
or
DURATION.
.
to set the minutes for
to confirm.
to set the hours for

Advertisement

Table of Contents
loading

Table of Contents