Safety Compliances; Warranty - Grandstream Networks GWN7000 User Manual

To set up the GWN7000, follow the steps below:
1. Connect one end of an RJ-45 Ethernet cable into the WAN1 or/and WAN2 port(s) of the
GWN7000.
2. Connect the other end of the Ethernet cable(s) into a DSL modem or router(s).
3. Connect the 12V DC power adapter into the power jack on the back of the GWN7000. Insert the
main plug of the power adapter into a surge-protected power outlet.
4. Wait for the GWN7000 to boot up and connect to internet/network. In the front of the GWN7000
the Power LED will be in solid green, and the WAN LED will flash in green.
5. Connect one of the LAN ports to your computer, the associated LED ports will flash in green.
6. (Optional) Connect LAN ports to your GWN7610 access points or/and other devices, the
associated LED ports will flash in green.

SAFETY COMPLIANCES

The GWN7000 VPN Router complies with FCC/CE and various safety standards. The GWN7000 power
adapter is compliant with the UL standard. Use the universal power adapter provided with the GWN7000
package only. The manufacturer's warranty does not cover damages to the device caused by unsupported
power adapters.

WARRANTY

If the GWN7000 VPN Router was purchased from a reseller, please contact the company where the
device was purchased for replacement, repair or refund. If the device was purchased directly from
Grandstream, contact our Technical Support Team for a RMA (Return Materials Authorization) number
before the product is returned. Grandstream reserves the right to remedy warranty policy without prior
notification.
Figure 2: GWN7000 Back View
GWN7000 Enterprise Router & Access Point Manager
User Manual
P a g e | 14