Grandstream Networks GWN7000 User Manual page 24

Client Certificate
Client Private Key
1.1.1.5 L2TP
Enabled
VPN Name
Zone
NAT Enable
Port Forwarding Rules
Port Trigger Rules
1.1.1.6 PPTP
Enabled
VPN Name
Zone
NAT Enable
Port Forwarding Rules
Port Trigger Rules
Remote PPTP Server
Username
Password
Use Tunnel as Default Route
Use DNS from Server
Number of Attempts to Reconnect
Use Built-in IPv6-managment
Click on
Click on
Table 13: L2TP
If checked the VPN tunnel will be enabled.
Set the VPN's name.
Set the Zone that will be using the VPN tunnel.
If checked NAT will be enabled.
Table 14: PPTP
If checked the VPN tunnel will be enabled.
Set the VPN's name.
Set the Zone that will be using the VPN tunnel.
If checked NAT will be enabled.
Set the remote PPTP server's IP/FQDN.
Set the client's username.
Set the client's password.
If checked the VPN will be used as default tunnel for all connected
devices to the zone.
If checked, all connected devices to the zone will be using DNS
from the PPTP server.
Set the number of attempts to reconnect to the server if it fails.
If checked the tunnel will be used IPv6 addressing.
GWN7000 Enterprise Router & Access Point Manager
User Manual
to upload client certificate.
to upload private key.
P a g e | 38