RS_5000_570727_0117_PRT.book Seite 13 Montag, 10. Oktober 2016 2:52 14
Using the charging reminder function
When the stethoset receiver is
switched off and the transmitter
automatically switches off (standby
mode), the
Battery
minutes to remind you to charge the stethoset receiver.
Charge the stethoset receiver by placing it into the trans-
mitter's charging compartment (see page 11).
The LED stops flashing and the charging process starts.
You can also switch off the charging reminder function
(see page 26).
Selecting the ear pads
You can choose between ear pads for larger
and smaller ears (supplied). The stethoset
receiver is delivered with the ear pieces for larger ears already
attached.
To replace the ear pads:
1
Carefully remove the ear pads from the stethoset receiver.
2
Put the other ear pads on the stethoset receiver.
1
Spare ear pads in different materials and forms are
available from your Sennheiser partner.
Putting the RS 5000 into operation EN
LED
will flash back and forth for 10
2
RS 5000
| 13