Advertisement
Earphones | |
USB charging cable with USB-C and USB-A connector | |
Silicone ear adapter set in the following sizes: XS, S, M (pre-mounted upon delivery) and L | |
Quick guide | |
Quick guide |
Online you can find:
You can find a list of accessories on the CX 150BT product page at www.sennheiser.com.
Contact your local Sennheiser partner: www.sennheiser.com > "Service & Support".
CX 150BT
Model: SEBT2
LED | Meaning; the headphones | |
lights up red | are being charged | |
lights up blue | are fully charged | |
flashes blue | are switched on | |
flashes red-blue approx. 1 min | are in Bluetooth pairing mode | |
flashes blue | Bluetooth pairing successful | |
flashes red | Bluetooth pairing failed | |
flashes blue | are connected to a device via Bluetooth | |
pulses red approx. 3 sec | are not connected to a device via Bluetooth or the connection has been lost | |
flashes red | rechargeable battery is almost empty | |
flashes red | are switched off |
If the LED does not light up immediately during charging, clean the charging socket and charge the headphones until the LED lights up again (> 9).
The headphones output voice prompts for the following functions. Using the Smart Control app, you can change the language of the voice prompts, choose between voice prompts and beep sounds, or deactivate the status messages with a few exceptions (e.g. rechargeable battery is empty).
Voice prompt | Meaning/headphones |
"Power on" | are switched on |
"Power off" | are switched off |
"Device (1) (2) connected" | are connected to device 1 or 2 |
"Lost connection" | are not connected via Bluetooth |
"Pairing" | are in Bluetooth pairing mode |
"Pairing successful" | Bluetooth pairing successful |
"Pairing failed" | Bluetooth pairing failed |
"Call rejected" | incoming call rejected |
"Call ended" | call ended |
"Mute on" | Microphone is muted, active call is put on hold |
"Mute off" | Microphone is reactivated |
"Recharge headset" | Rechargeable battery is empty. Recharge the headphones. |
"Volume min" | volume set to minimum |
"Volume max" | volume set to maximum |
"Power on" are switched on "Power off" are switched off "Device (1) (2) connected" are connected to device 1 or 2 "Lost connection" are not connected via Bluetooth "Pairing" are in Bluetooth pairing mode
The headphones have a built-in rechargeable battery. A complete charging cycle takes approx. 1.5 hours. Before using the headphone s for the first time, charge the rechargeable battery for a complete charging cycle without interruption.
When the headphones are being charged, the LED lights up (> 6). When the battery charge drops to a critical level, a voice prompt ask s you to recharge the headphones ("Recharge headset").
Sennheiser recommends using the supplied USB cable and a compatible standard USB power supply for charging the headphones.
LED | Meaning | |
flashes red | Rechargeable battery is being charged (charge level is very low) | |
lights up red | Rechargeable battery is being charged (charge level approx. 50%) | |
lights up purple | Rechargeable battery is being charged (charge level approx. 75%) | |
lights up blue | Rechargeable battery is fully charged |
To be able to use the Bluetooth wireless connection, you must register both devices (headphones and e.g. smartphone) via the device settings of your smartphone. This process is called pairing.
If operation differs from the steps mentioned, also refer to the instruction manual of the Bluetooth device you are using.
If you switch on the headphones for the first time, they automatically switch to pairing mode.
The headphones are compatible with Bluetooth 5.0.
If your audio source supports AAC audio encoding, music is automatically played in high audio quality: Otherwise the headphones will play your music in normal audio quality (SBC).
Paired devices establish the Bluetooth wireless connection immediately after switch-on and are ready for use.
On switch-on, the headphones automatically try to connect to the last two connected Bluetooth devices. The headphones can save the connection profiles of up to eight Bluetooth devices with which they have been paired.
If you pair the headphones with the ninth Bluetooth device, the saved connection profile of the least used Bluetooth device will be overwritten. If you want to re-establish a connection with the overwritten Bluetooth device, you have to pair the headphones again.
If no connection is established within 5 minutes, pairing mode is terminated and the headphones switch to idle mode. If necessary, repeat the steps described above.
The Smart Control app allows you to get to know your headphones even better.
Download the app from the App Store or Google Play and install it on your smartphone. Alternatively, you can use your smartphone to scan the following QR code or to call up the following Internet site: www.sennheiser.com/smartcontrol
The perceived sound quality and bass performance of the headphones depends to a large extent on their correct fit in the ear.
You can choose between 4 different ear adapters in size XS, S, M and L. The ear adapters must fit snugly in the ear canal and completely seal your ears.
If the earphones fit too loose in the ear canal and fall out easily:
If you feel immediate pressure when wearing the earphones:
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent hearing defects.
Make sure that Bluetooth is already activated on your Bluetooth device when switching on the headphones.
If Bluetooth is activated and the headphones cannot find a paired Bluetooth device within a few minutes, you hear the voice prompt "Lost connection". The LED flashes red. The headphones switch to standby mode.
The headphones automatically switch to idle mode if no paired Bluetooth device can be found within 5 minutes. You can wake up the headphones from idle mode by pressing the multi-function button for approx. 3 seconds.
When the headphones are connected to your Bluetooth device, the battery charge status can be displayed on the screen of your smartphone (depending on the device and operating system used).
You can check the battery charge level of your headphones manuall y by pressing the volume - button once. You hear the voice prompt "More than xx % battery left".
Voice prompt | Meaning |
"Recharge headset" | The rechargeable battery is empty. Recharge the rechargeable battery (> 9). In addition, the LED flashes red. |
"More than xx % battery left" | The remaining battery charge is displayed as a percentage. |
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent hearing defects.
You can adjust the volume for music, voice prompts, and phone calls.
You can also adjust the volume using the connected Bluetooth device.
The music playback functions are only available when the headphones and the device are connected via Bluetooth. Some smartphones or music players may not support all functions.
Multi-function button | Function | |
Press 1x | Plays or pauses music |
Multi-function button | Function | |
Press 2x | Plays the next track in the playlist |
Multi-function button | Function | |
Press 3x | Plays the previous track in the playlist |
The call functions are only available when the headphones and the smartphone are connected via Bluetooth. Some smartphones may not support all functions.
The multi-function button allows you to control the call functions.
Multi-function button | Function | |
Press 1x | Accepts a call | |
Press 1x | Ends a call Voice prompt "Call ended" | |
Hold for 2 sec | Rejects a call Voice prompt "Call rejected" | |
Press 1x | Accepts an incoming call and ends the active call | |
Press 2x | Puts the active call on hold and accepts an incoming call | |
Press 2x | Toggles between active call and call on hold |
To continue the call and reactivate the microphone:
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit and damage the electronics.
For reasons of hygiene, you should replace your ear adapters from time to time. Spare ear adapters are available from your Sennheiser partner.
Sennheiser ensures and guarantees that the rechargeable battery performs at its optimum upon purchase of the product. If, upon purchase or within the warranty period, you suspect that the rechargeable battery is obviously defective or if a charging error/battery error is displayed (> 6), stop using the product, disconnect it from the power supply system and contact your Sennheiser partner. Your Sennheiser partner will coordinate the repair/replacement with you.
Do not return a product with a defective battery to your dealer or Sennheiser partner unless requested to do so. To find a Sennheiser partner in your country, search at www.sennheiser.com/servicesupport.
CX 150BT
Model: SEBT2
Sennheiser electronic GmbH & Co. KG
Am Labor 1
30900 Wedemark
Germany
www.sennheiser.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Sennheiser CX 150BT, SEBT2 - In-Ear Wireless Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the CX 150BT that isn't answered in the manual? Leave your question here.