Table of Contents
Advertisement
Step 4. Carefully remove plates and components until blade or rack to be replaced is
Step 5. Re-assemble shutter's four layers. Ensure that components are oriented and
Note: The difference between the two types of shutter blades can be found by
examining the main edge. Coated Side A blades (12.9663.1323) are beveled and the
Coated Side B blades (12.9663.1324) are not.
Rack
Straight
Blade
02. 96 63. 001 0 F
reached. Install new component(s) as required.
aligned as shown in
Figure
Shutter Blade
Shutter Blade
Rack
Layer 1
Straight
Blade
Layer 3
Figure 2-17: Shutter Assembly Layer Orientation
14-May-2009
2-17.
Install shutter blades
with dark mirror coating
facing down. DO NOT
touch blades with
bare fingers.
M
:
AINTENANCE
Align main edge of blade with
small hole in shutter rack
Beveled
Blade
Layer 2
Beveled
Blade
Layer 4
2
39
Hide quick links:
Advertisement
Table of Contents
