Frame Or Top Hat Replacement - Philips VL1000 TS Service Manual

Frame or Top Hat Replacement

An accessory frame holder is provided for the addition of a top hat or gel frame with
silks, frosts or color correction if required. The frame holder is designed to fit a
standard 7.5-inch gel frame or top hat.
To remove and replace frame or top hat:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At front lens, press upward on accessory frame latch and turn to open.
Step 3. Remove frame/top hat, if any
Step 4. Install frame/top hat and close latch.
Latch
02. 96 63. 001 0 F
Gel, Silk, or Frost
Press Up
and Turn
Head Assembly
Figure 2-6: Installing a Frame or Top Hat
14-May-2009
(Figure 2-6).
Accessory Frame
NOTE:
The accessory frame is not a Vari-Lite accessory.
2
M :
AINTENANCE
25