Shutter Blade Or Rack Replacement - Philips VL1000 TS Service Manual

VARI❋LITE® - VL1000™ ERS L

Shutter Blade or Rack Replacement

Parts:
as required:
BLADE, SHUTTER, COATED SIDE A (12.9663.1323)
BLADE, SHUTTER, COATED SIDE B (12.9663.1324)
RACK, SHUTTER (10.9663.1314)
Tools:
#2 Phillips screwdriver
To remove and replace a shutter blade or rack:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. Remove shutter assembly. Refer to
Step 3. Place shutter assembly on work bench, motor side down. Remove four
6-32x1/4"
PFS Screw
Do not touch shutter blades with bare
fingers. Clean with soft cloth if touched.
38
S
UMINAIRE ERVICE
page 36.
6-32x1/4" PFS screws and remove cover plate
Cover
Separator
Spacer
Beveled Blade
Separator
Stiff Separator
Spacer
Straight Blade
Separator
Stiff Separator
Beveled Blade
CAUTION:
Figure 2-16: Shutter Assembly Breakdown
14-May-2009
M
ANUAL
"Shutter Assembly Replacement" on
Layer 4
6-32x1/4" PFS Screw
Layer 3
Layer 2
Spacer
Separator
Stiff Separator
Spacer
Rack (x8)
Straight Blade
Separator
(Figure 2-16).
Cover Plate
Shutter
Assembly
Layer 1
02. 96 63. 001 0 F