Table of Contents
Advertisement
3
Advanced Configuration
The illustration at the right shows the default settings
for the output signal channel.
The GPIO Name determines the output or input
points on the GPIO connector.
•
The Output signal must be named gpio106 and
allows setting an initial value.
Click on the Save button to save any changed settings. The changes will not take effect until the
server is stopped and started.
Refer to the following sections for a description of how to combine the GPIO inputs and outputs with
other alarms. For example, the camera can send the output signal when there is an Video Analytics
alarm. Similarly, the camera can save an image snapshot when there is an input. These associations
are configured with the Alarm Manager module described in
427-0089-00-12 Version 100
Alarm Manager, pg.
July 2016
54.
52
Advertisement
Table of Contents
