Advertisement
Warranty
SawStop warrants to the original retail purchaser of the T-Glide Fence System - Professional Series
accompanying this manual that the fence system will be free from defects in material and workmanship for ONE
YEAR from the date of purchase. This warranty does not apply to defects arising from misuse, abuse, negligence,
accidents, normal wear-and-tear, unauthorized repair or alteration, or lack of maintenance.
Please contact SawStop to take advantage of this warranty. If SawStop determines the fence system is
defective in material or workmanship, and not due to misuse, abuse, negligence, accidents, normal wear-and-
tear, unauthorized repair or alteration, or lack of maintenance, then SawStop will, at its expense and upon proof
of purchase, send replacement parts to the original retail purchaser necessary to cure the defect. Alternatively,
SawStop will repair the fence system provided it is returned to SawStop, shipping prepaid, within the warranty
period. This warranty is void if the fence system is modified without the prior permission of SawStop, LLC, or if the
fence system is located or has been used outside of the country where the authorized SawStop distributor from
whom the fence system was purchased resides.
SawStop disclaims any and all other express or implied warranties, including merchantability and fitness for a
particular purpose. SawStop shall not be liable for death, injuries to persons or property, or incidental, consequential,
contingent or special damages arising from the use of the fence system.
This warranty gives you specific legal rights. You may have other rights which vary from state to state.
Safety
1.
You must install a rip fence before using your saw. Attempting to use the saw without the rip fence could result
in serious personal injury.
2.
Always use a rip fence when making rip cuts. Never perform a ripping operation freehand or a serious injury
may result.
3.
Always use a push stick or push block when your hand comes within 6 inches of the blade. Attempting to use
the rip fence for narrow cuts without a push stick or push block could result in a serious personal injury.
4.
Do not use the miter gauge when making rip cuts.
5.
While making bevel cuts, use the fence only on the right side of the saw blade to prevent the blade from
possibly contacting the fence. The brake will activate if the spinning saw blade comes into contact with the
metal in the fence.
Advertisement
