Packing instructions
Insurance
Repair parts
Disposal of product waste
2048723-002C
Introduction: Disposal of product waste
The representative will record all necessary information and will provide a
Return Authorization Number. Prior to returning any product for repair, a Return
Authorization Number must be obtained.
If you have to return goods for service, follow these recommended packing
instructions.
Remove all hoses, cables, sensors, and power cords from the monitor before
packing.
Pack only the accessories you are requested to return; place them in a
separate bag and insert the bag and the product inside the shipping carton.
Use the original shipping carton and packing materials, if available.
Observe the environmental conditions detailed in the
page A-2.
It is recommended that all returned goods be insured. Claims for loss or
damage to the product must be initiated by the sender.
If the original shipping carton is not available:
Place the product in a plastic bag and tie or tape the bag to prevent loose
particles or materials from entering openings such as hose ports.
Use a sturdy corrugated container to ship the product; tape securely to seal
the container for shipping.
Pack with at least 4 inches of padding on all sides of the product.
Insurance is at the customer's discretion. The shipper must initiate claims for
damage to the product.
To order parts, contact Service Parts at the address or telephone number listed
on the "How To Reach Us..." page found in the front of this manual.
Please allow one working day for confirmation of your order. All orders must
include the following information.
Facility's complete name, address, and phone number
FAX number
Your purchase order number
Your GE account number
As you use the monitor, you will accumulate solid wastes that require proper
disposal or recycling. These include batteries, patient applied parts, and
packaging material. Dispose of these materials according to local or national
regulations.
CARESCAPE V100 Vital Signs Monitor
"Specifications"
on
1-15