Select A Time Zone; Turn Off Led Indicators - Tenda AV1000 User Manual

the extender which is obtained from the connected router), subnet mask, default gateway, and DNS
server. When you uncheck the option before Enable, you can set up them manually.

4.3 Select a Time Zone

1. Log in to the extender's web UI, and click Administration.
2. Move to the Date & Time part, and select your time zone.
3. Click OK on the bottom of this page to apply your settings.
--End
Tips
The system date and time sync with the internet according to your selected time zone.

4.4 Turn off LED Indicators

If you want to use the extender in your bedroom at night, but the LED indicators on it disturb you,
you can turn them down on the extender's web UI instead of unplugging them.
1. Log in to the extender's web UI, and click Administration.
2. Move to Device Management part, and click Disable.
--End
16
Configure the Extender