Aastra 6757i CT User Manual page 137

7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the Drop key.
Using Local Conferencing in Live Dial Mode
Use the following procedure to create a conference call using local conferencing in live dial mode.
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key. A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the Conf key. You should hear a dial tone before dialing begins.
5. Enter the phone number of Party 3.
Note:
Users are not able to edit the destination number as the phone will either match the inputted number to a dial plan
or wait for the set digit timeout.
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the Drop key.
Note:
You can use 2 and 5 to scroll through and see the numbers and names (if available) of the parties in the conference call.
When a name is displayed, pressing 4 drops the displayed party from the call.
41-001384-00 Rev 01 – 06.2013
L1 John Doe
1 4161234567
.
2. 4299
Dial
Cancel
More
Handling Calls
129