Zte ZXA10 C320 Maintenance Manual page 41

Steps
1. Right-click the ZXA10 C320 NE, and select System Configuration Management >
Board Reset Switch Config from the shortcut menu. The Reset/Swap Card window
appears, as shown in
Figure 3-15 Reset/Swap Card Dialog Box
2. Click
Figure 3-16 Select Card Dialog Box
3. Select the active card, and click Swap. The Confirm dialog box appears. Click OK to
start active/standby card changeover.
SJ-20120615152640-008|2012-06-30 (R1.0)
Figure 3-15.
. The Select Card dialog box appears, as shown in
Chapter 3 Data Backup and Recovery
3-13
ZTE Proprietary and Confidential
Figure 3-16.