Downloading Printing/Cutting Data; Pausing Operations - Roland Color CAMM PC-50 User Manual

Removal
1
Press the SETUP key.
The SETUP LED
goes out
The carriages moves to the left edge of
the printing/cutting area.

5-6 Downloading Printing/Cutting Data

The unit will begin printing/cutting when it receives printing/cutting data sent from the computer.
For further details, refer to the user's manual provided with your software.

5-7 Pausing Operations

If you want to stop the PC-50 momentarily while it is printing or cutting, follow the procedure described below.
1
Press the PAUSE key.
The PAUSE LED
lights up
Printing or cutting is paused.
2
Raise the sheet loading lever.
Use the separate blade included with the
PC-50 to cut the material off of the roll.
2
To resume printing or cutting
Press the PAUSE key.
The PAUSE LED
goes out
Printing or cutting is resumes.
To Terminate printing or cutting
1) Halt transmission of printing or cutting instructions
from the computer.
2) Press the SETUP key.
The SETUP LED goes out
Printing or cutting instructions already sent
from the computer to the PC-50 are deleted,
and operation stops.
5 Basic Operation
11