Xerox Phaser 3330 User Manual page 95

Symptom
The output print is wrinkled or
stained.
Envelopes are wrinkled or
creased when printed.
The top margin is incorrect.
The printed surface of the paper
is bumpy.
® ®
Xerox Phaser 3330 Printer
User Guide
Solutions
• Verify that the paper is the correct size, type, and weight
for the printer and that it is loaded properly. If not, change
the paper.
• Try a new ream of paper.
• Change the Paper Type settings in the print driver.
• In the Printing Preferences of the print driver, on the Pa-
per/Output tab, change the Paper Type setting.
• Verify that envelopes are loaded properly in the bypass
tray.
• Follow the guidelines for printing on envelopes. For details,
refer to Guidelines for Printing
• Verify that the paper is loaded properly.
• Verify that the margins are set correctly in the application
you are using.
1. Print a solid image over the entire surface of one sheet
of paper.
2. Load the printed sheet into the tray with the printed side
face down.
3. Print five blank pages to remove debris from the fuser
rollers.
Troubleshooting
Envelopes.
7-27